Processing 290 lbs of scrap lead

A video showing how I set up and use the Lee Universal Neck Expanding die. The die is used for flaring cases so they can easily accept lead cast bullets and gas checked bullets without damaging the powder coating or shaving the lead from the bullets.

https://www.reloadingallday.com/post/varget-vs-shooters-world-precision

Processing 290 lbs of scrap lead

A video showing how I set up and use the Lee Universal Neck Expanding die. The die is used for flaring cases so they can easily accept lead cast bullets and gas checked bullets without damaging the powder coating or shaving the lead from the bullets.

This SWC ‘Quad’ Hollow Point is showing promise with the 30:1 blend at this 926fps speed, I have high hopes for deep penetration in the gel test.

TC Encore SSK 45-70 with IMR-3031   Well guys, I took the Encore out for a spin, and on the recommendation of Rebel and Georgiaboy44 I got a couple pounds of IMR3031 to try. QuickLOAD predicted no pressure concerns for an Encore that theoretically could be rechambered to 458WinMag, so I did a ladder from 49.3 […]

One of the corrective actions you can take it to accurately measure and adjust your headspace to help in reliable ignition, accuracy and optimal brass life. Due to the break open design and the inherent flex in the action when fired with more flex in higher pressure rounds, you cannot merely take a rimless bottleneck cartridge or even rimmed bottleneck cartridge and measure it as you would a bolt action gun.

Welcome back to the ballistic gel tests series as I dive into the Barnes 127 LRX. I had been searching for multiple different types of bullets that I could use in .264 that was non-lead. Ultimately, so I could hunt in states that only allowed specific types of ammunition. With so many choices, I decided […]

Will this dedicate AR upper from Fulton Armory be able to hold its own in the dayattherange 22LR Challenge? Can the old DevilDog still use Iron Sights? Guess we will see.

After this last test I needed another 50 fps, I reached out for help & Eli aka ‘Mr.Revolverguy‘ & Julio aka ‘ocean374‘ came to my rescue with their ‘QuickLOAD’ programs. We discovered that the Power Pistol is more than adequate to do the job and then some, leaving me room on the top end for […]

Lee Hardness Tester Stand

Episode 51 is Live!  Today we talk a bit more about building AR15's and share some news.

Episode 50 is Live!  Today we talk a bit more about the g42 as well as the g48 and turning the g48 into a "slimmed g19."

Today, A "Happy Valley" Cop Joins Us For A Discussion