![maxresdefault[1]](https://www.thereloadersnetwork.com/wp-content/uploads/2020/06/maxresdefault1-277x156.jpg "Making Flat Springs 2")
![maxresdefault[1]](https://www.thereloadersnetwork.com/wp-content/uploads/2020/06/maxresdefault1-1-277x156.jpg "Muzzleloader Development Project Debriefing 4")
![maxresdefault[1]](https://www.thereloadersnetwork.com/wp-content/uploads/2020/06/maxresdefault1-2-277x156.jpg "Gun Review: Armalite M15A4TN 6")
![maxresdefault[1]](https://www.thereloadersnetwork.com/wp-content/uploads/2020/06/maxresdefault1-3-277x156.jpg "Mud Testing Revolvers 8")
![maxresdefault[1]](https://www.thereloadersnetwork.com/wp-content/uploads/2020/07/maxresdefault1-277x156.jpg "7mm Mag vs. 3/8 AR500 Plate 10")
![maxresdefault[1]](https://www.thereloadersnetwork.com/wp-content/uploads/2020/08/maxresdefault1-277x156.jpg "Powder Coating an AR-15 Lower using WD-40 Method 16")
![maxresdefault[1]](https://www.thereloadersnetwork.com/wp-content/uploads/2020/08/maxresdefault1-1-277x156.jpg "Homemade Case Trimmer 18")
![maxresdefault[1]](https://www.thereloadersnetwork.com/wp-content/uploads/2020/08/maxresdefault1-2-277x156.jpg "Rifle (Muzzleloader) Packaging Experiment 20")
Exploring the 350 Legend
TheIdahoanShow
This video is an account of my experiences with the .350 Legend cartridge, from first picking up a Stoner upper chambered for it to the point of finally getting handloads to run reliably, which proved to be a more difficult undertaking than I expected. That said, I still think this cartridge has a lot of potential.
Idaho was one of the last continental US states to be settled and, more so than some parts of the US, the culture of Idaho still retains a frontier spirit of self-reliance. As host of TheIdahoanShow on YouTube, I endeavor to produce videos capturing this enduring pioneer spirit, at least as it is practiced by this Idahoan. Of course, shooting and associated ancillary activities are an important part of Idahoan culture, and so many of my videos pertain in some way to the making or testing of firearms and/or ammunition. Here on the Reloaders’ Network, I have endeavored to consolidate this portion of my work as a reference for the reloading community.