I originally wanted a bullet mold which I could use to cast a heavy 300blk bullet which was easy to cast, coat, load, and shoot for plinking in my 300 blk AR15 at subsonic speeds. I tried a few of the already available molds but had feeding issues, undersized issues, boat tail issues, or issues […]
Several years ago, I purchased a lightly used brushed-chrome model of the Desert Eagle handgun chambered in 50 Action Express. Finding the .50 cal bullets for it has been tricky at times–other times it has been quite expensive. To save money and to not be reliant on bullet availability at the local or online shops, […]
I go through the entire process of casting, powdercoating, loading, and shooting some hard cast round nose bullets using the high quality NOE bullet mold for my 10mm handguns. I had wanted a round nose bullet for 10mm plinking loads. Something that would feed simply and flawlessly in each of my 10mm handguns and carbines. This bullet mold seems to do the trick.
For all of you who need a little fart load for a squirrel... or maybe a mouse?
"TACOPOCALYPSE Giveaway" (How to Enter!) - Like all of my giveaways, I require a little effort to enter. This giveaway, due to the nicer options of prizes, will reward those who put forth more effort. To enter, you must.... The winner will be able to pick one of the following 5 options: Keltec Sub 2000/RCBS Pro-Melt 2/6.5 Grendel Upper/Mauser Mod 98/NOE bullet mould w/Mould Mallet and Bushing Sizing Die
Winner! Unboxing package from JH586 plus a plea for advice on a cracked stock.
Alright guys, today I’m summoning the inner redneck in my video. For the longest time, I’ve wanted to shoot a car or vehicle. Nothing illegal, nothing violent, etc… I’ve just wanted to legally be able to shoot a car/vehicle and see what different cartridges and rounds do. Opportunities to do so have almost come to […]
In this video I show most of the steps from start to finish on how I make one of my favorite milk jug exploding 45-70 loads. All the details should be in the video, but if you have any questions, feel free to leave a comment here and I will respond as quickly as I […]
In this video, I show how I make some light weight coated cast bullets for my break action 300 blk firearms. These suppress really well and are a hoot to shoot. This video was recently deleted from my Youtube channel because it had casting/reloading content. I’ve uploaded it to Vimeo so that it will still […]
I wanted to see how much penetration these subsonic 600 gr 458 socom bullets would have through water (milk jugs). We saved up a bunch of jugs and went out to test. Watch the video for the results. Test Firearm: 10.5″ 458 Socom Upper by Radical Firearms Registered SBR lower Silencerco Hybrid Suppressor Ammo Details: […]
Today we take a look at the Rock Island Armory 1911 chambered in 22 TCM.
Just a quick video doing some speedy hand casting, powder coating, loading, and shooting of some 154 gr round flat nose cast bullets from an NOE bullet mold. I like to show the whole process of casting, loading, shooting so you can see the finished product being used. Enjoy!
I had lots of questions about how to cast good hollow point bullets and avoid some of the headaches, so I decided to make a video to show some of the things I have learned over the years. Hopefully this video is helpful to some of you and can save you from frustration.
Today, I show in this video the entire process from start to finish how I cast, powder coat, load, and shoot some 250gr coated cast lead hollow points in the 44 magnum. This is one of my "go to" loads for blasting milk jugs without much recoil. These loads are perfect for maximum explosion with minimal recoil--great for those milk jug duels with the buddies. Got questions? Feel free to leave me a comment below, and I will do my best to answer it!
For today's video we do a little casting, powder coating, reloading, and finally shooting for some 160 gr heavy subsonic ammo. For the casting portion, I utilize the NOE 358-155-TC-AS5 bullet mould which was designed with a longer tapered nose to allow long seating bullet--which in turn leaves plenty of space inside the 9mm case for powder. I shoot the ammo in a few different suppressed firearms including my 9mm AR15 and glock 19. A very quiet, but hard-hitting subsonic load which smacks the steel quite nicely.
Every once in a while you find something that just works, and works well every time. It seems like perfection in a way. That is how I felt about my NOE 230 gr bullet mold which was a clone of the H&G 34 mould. Link to that mold. The mold always seemed to cast good bullets, and […]
Survival Pistol? Bolt Action Side Charging AR (No Gas)
Thoughts and Shots With an Old 30-40 Krag
Bank of America bought me an AR-15!
Making 600 Gr. 50 Alaskan Subsonic Ammo IE: 510 Whisper on the cheap!
The 458 SOCOM (Mags, Uppers, Tools, Reloading--Things you should know!)
To powder coat or not to powder coat... that is the question. And today we have some answers.
Today, we take a stroll through the mind of Taco to explore light-weight subsonic ammo in the 300 AAC Blackout (why you'd ever want to buy a break action rifle or pistol, and the reasons why Taco seems to shoot so many rounds through his 300 blk firearms...) We also go through the design of the NOE HTC310-135-RN bullet mould, why it was created and where it came from.
Having some fun with a new Match Grade Machine Barrel!