James Pollard

I’m using a washer 1/8 inch thick instead of readjusting dies. James PollardShooter, caster, handloader

A good day at the range except for heavy winds. Had a 15 to 20 mph crosswinds. James PollardShooter, caster, handloader

Milling aluminum with a router and a jig can be done James PollardShooter, caster, handloader

Pieces and parts I put together James PollardShooter, caster, handloader

After testing different charges and powders, I have my load. James PollardShooter, caster, handloader

Mold maintenance James PollardShooter, caster, handloader

Using a tubing cutter to convert to 300 BLK James PollardShooter, caster, handloader

I’m getting closer to a load I like James PollardShooter, caster, handloader

My bucket of excuses are old eyes and open sights and shooting in the rain James PollardShooter, caster, handloader

I’ll try some loads on the first nice day I get a chance . James PollardShooter, caster, handloader

A shooting bench made from pieces and parts laying around. It folds up nice for transport to the range and back. James PollardShooter, caster, handloader

Modifying a 100 grain mold to drop a cast 75 grain 223 bullet James PollardShooter, caster, handloader

Ingot Molds And Dillon Stuff. Thanks To The Both Of You. James PollardShooter, caster, handloader

Extended Length Rubber Mulch Bullet Trap ….. All rounds were shot at 25 yds and using 2 bags of rubber mulch at $6 or $7 a bag James PollardShooter, caster, handloader

Makes cleanup so much easier

Bullet puller from 12 gauge hull.

My $12 bullet trap

RCBS Neck Turner Demo

I change the A2 front sight from pinned on to a set screw due to a barrel change

The old girl still shoots

My ultra cheap brass case annealer .... A $10 - $15 eBay motor will make it work. The torch head is from Harbor Freight.

Steel shot load with BB's

Easy and Cheap To Make

DIY brass case annealler for less than $50