Lever Action Gypsy

Here you can see how easy it is to bypass the thermostat on either the Lyman Mould Master Model 61 & Model XX bottom pour pots. You need to run it on a PID or other thermostat after bypassing it, but with a PID I find I get much quicker heat up time and very […]

I have both Lyman Mold Master XX and Lyman Mold Master 61 pots and while both are excellent bottom pour pots, most need work at some point. Here the Lyman Mold Master XX mica insulator was falling apart and needed to be replaced. Lever Action Gypsy

More powder coating techniques for bullet casters, and this time we look at using silicone mini ice cube trays for rifle bullets. Also, revisiting Eastwood’s Smoke Chrome PC after the last video’s test failure, and got it to coat pretty well this time around! I’ve discovered some new insights to powder coating with those ‘tough […]

Powder Coating

Here’s what I find works best for powder coating hollow point bullets for me Lever Action Gypsy

There’s lots of ways to do this, and I’ve tried a lot of them, but this is the way I found that works best for the results I want to get. From freshly cast bullets to finished PCd bullets, here’s what I do Lever Action Gypsy

After years of using an old Black & Decker 425 Workmate as a steel frame for a 1 1/2 inch thick plywood top (two 3/4 pieces glued and screwed together) for my portable reloading bench, I decided it was time to build a new one. While the 425 model does a fine job supporting my […]