A pleasant February afternoon evaluating a 30-30 Winchester recipe suggested by Georgiaboy44.

Mounting the XS Sights Lever Scout Mount requires dressing down the mounting "jackscrew" that fits into the rear sight dovetail.

The rifle action has been cleaned and reassembled - moving on to preparations for mounting the XS Sights Lever Scout Mount.

While checking the forearm clearance around the XS Sights Lever Scout Mount, I decided to disassemble the action for a good cleaning. This was my first time taking a Marlin apart...

Sometimes the solution is simple - removing the magazine tube releases the pressure from the front cap, and allows the forearm to be lifted free!

Test fitting the XS Sights Lever Scout Mount on the Glenfield 30, and attempting to figure out how to remove the forearm for cleaning. Have a good laugh as I miss the obvious...

Revisiting a set aside Lever Action Scout Rifle project from a few years ago.

Just a fun day on the range with this ol girl. I added a period peep on it last year and really enjoy cast bullets in this one!! cwlongshot

Our new MGM 30/30 barrel, 26″ long 1 x 7″ twist to stabilize long heavy bullets, shot very well with 200 grain Match Sierra HPBT bullets and also the 220 grain Sierra GameKings. So with those loads in the bank, let’s put up a subsonic load utilizing the 220 grain Berry’s bullet – a favorite […]

With the emphasis on long range high ballistic coefficient rifles today, along with the impending need of stabilizing long all copper bullets, shooters may be transitioning to fast twist rifles in all calibers… FortuneCookie45LCFortuneCookie45LC started posting videos on YouTube in 2012.  He has been a Reloader and Shooter since 1969.

The 32 Win Special vs 30-30 FTX bullets in ballistics gelatin. 32 Win Spl is 165 gr at a little over 2380 FPS and the 30-30 160 gr FTX at almost the same 2380 FPS Leverguns 50Most of our videos are about lever action rifles and other cowboy guns, including carbine and shotguns, sixguns, black […]

It occurred to me that when we cast bullets, we get some unshootable reject bullets, but there are also a good number of shootable blem bullets. Why not load these for short range plinking, range and new shooter ammo? Will these give any satisfaction? Let’s find out…and if yes, we’ll have some useful ammo… FortuneCookie45LCFortuneCookie45LC […]

A quick video response for cwlongshot that shows the barrel breech and extractor of a Savage 340A chambered in .30-30 Winchester.

These 12 gauge barrel adapters from Chaszel out of Toccoa, Georgia offers some serious versatility from any of our single and double barrel shotguns. The 45/70 barrel adapter has already tested out to be an excellent performer…let’s do a short tabletop review of these 30/30 adapters before we do the range testing …. FortuneCookie45LCFortuneCookie45LC started […]

This is how I installed a scout scope on a 30-30 Winchester 94ae James PollardShooter, caster, handloader

Subsonic loads for 30-30 Win 150 Gr cast bullets with Trail Boss powder Quest for the perfect load

30-30win Reloading 100gr Speer Rn with RL7 Quest for the perfect load

This time I desecrate my 30-30 and use my improvised comb raising kit. Jerry 19112A On A Budget

Marlins 336 lever action carbine caliber 30-30 Leverguns 50Most of our videos are about lever action rifles and other cowboy guns, including carbine and shotguns, sixguns, black powder, hunting, outdoors, and primitive skills.

Is Oobleck Non-Newtonian fluid bulletproof? Leverguns 50Most of our videos are about lever action rifles and other cowboy guns, including carbine and shotguns, sixguns, black powder, hunting, outdoors, and primitive skills.

My last two videos revolved around loading and testing the LEE C309-150F - comparing tumble lubed and powder coated variations cast by my friend Mark Johnson. I have found it necessary to make a correction and a retraction regarding the content of those videos.

My friend Mark Johnson suggested that I compare powder coated vs. tumble lubed bullets in .30-30 Winchester...he even provided the samples!

My friend Mark Johnson suggested that I compare powder coated vs. tumble lubed bullets in .30-30 Winchester...he even provided the samples!

Testing powder coated Lyman 311041 cast bullets that were sent to me by GunFun ZS in my Savage 340.