308 on a Budget (Intro)
4
08:50

308 on a Budget (Intro)

It’s time to start our 308 load series. This is our introduction, where we look at components and equipment we’ll be using. Thanks for watching, and I hope you enjoy the series. JH586My name is Jamie, and I’m Lisa’s husband, Jay and Amanda’s dad, and Rigby’s PawPaw. I’m relatively new to reloading and certainly to […]
WCChapin | Remington 760 Carbine – Cast .308 Win | Trying the Modified LEE C309-160RN at 100 Yards
6
12:17

WCChapin | Remington 760 Carbine – Cast .308 Win | Trying the Modified LEE C309-160RN at 100 Yards

Awhile back I modified a single cavity LEE C309-160RN bullet mold by milling off the gas check shank portion - resulting in a plain base bullet that drops at about 130 grains. The powder coated, lubed and sized bullets printed well at 50 yards from my Remington 760 Carbine chambered in .308 Winchester, so it made sense to press the yardage out a bit further.
Peterson 308 Winchester SR Brass Review
8
20:14

Peterson 308 Winchester SR Brass Review

First of a series reviewing components that are currently available…or where at the time of the videos 🙁 First up is Peterson 308 Winchester Brass with Small Rifle Primer Pockets. Initial testing shows some high pressure signs using known loads…not max loads. More testing to be done with once fired brass. Hazzbro’s HideReloader, shooter, flintlock […]
Annealing 308 brass first time
8
01:40

Annealing 308 brass first time

Trying to anneal 308 brass for the first time Only used this annealer 1 time. I’m a newbie 2 annealing Red Raider ReloadingI began reloading about a year ago . After a friend put the idea in my mind then after watching JRB videos and Eagle eye shooting. I was a avid pistol shooter but […]