"TACOPOCALYPSE Giveaway" (How to Enter!) - Like all of my giveaways, I require a little effort to enter.  This giveaway, due to the nicer options of prizes, will reward those who put forth more effort.  To enter, you must.... The winner will be able to pick one of the following 5 options: Keltec Sub 2000/RCBS Pro-Melt 2/6.5 Grendel Upper/Mauser Mod 98/NOE bullet mould w/Mould Mallet and Bushing Sizing Die

I go through the entire process of casting, powdercoating, loading, and shooting some hard cast round nose bullets using the high quality NOE bullet mold for my 10mm handguns.  I had wanted a round nose bullet for 10mm plinking loads.  Something that would feed simply and flawlessly in each of my 10mm handguns and carbines.  This bullet mold seems to do the trick.

Just a brief update on the channel.

This is a demo on how to make a guide to attach the tail wads to the Russian Fire hydrant slug. also, a few thought about jumping into the deep end and purchasing them. You have to think in terms of Costco and how much you get to your door for the shipping.

I made a video showing some plinking loads using the NOE HTC355-120-RN-BS6 bullet mold.

In this casting video I wanted to throw in something I’ve never attempted before. Trying to handle 3 single cavity moulds in one casting session and 2 of them Hollow Point moulds, but there’s a caveat to that…two different blends of lead in the pots, one an 11BHN general purpose pistol fodder lead, and the […]

300 BLK Cast Bullet For Dummies (NOE 310-225-RN) Start to Finish!

For all of you who need a little fart load for a squirrel... or maybe a mouse?

308 casting and powder coating and sizing

315 Gr 338 Spectre Subs -- Now I have ammo!

338 Spectre Cast 250gr Subsonic Bolt Gun Loads (NOE341-245-SP)

So what happens when it is late at night, and you still have one more load of laundry you gotta get done?  Well, occasionally you get random genius combined with late night weirdness…  That’s what I am delivering today (as well as a wish for all of you to have a great Friday and awesome […]

600 gr. 458 SOCOM Subsonic Loads (Slow Heavy Hard Hitters!)

Link to the 44 mag bullet mold I was using: 44 mag mold Link to the 357 mag bullet mold Evan was using: .357 mag mold Link to the 45-70 bullet mold we were both using: 45-70 mold Link to the “legohead” bullet mold I talked about: legohead mold Link to video on making the […]

coupon code: flt001 at NOE Full.Lead.TacoI love guns, tacos, and lead. I use the guns. The guns eat lead. And I eat tacos. The videos on this channel focus on the first two items–using guns and making the ammo that gets used in them. If there is a video project you want me to do, […]

Beginning Casting Discussion on Equipment

Casting. sixshootertexan

Thanks for Watching.

I did this video some time ago; it’s a good idea if you're into mixing.

Bullet Mould Materials People have been casting their own bullets for literally hundreds of years.  While the idea of pouring molten lead into a mould hasn’t changed much over that time, the technology used to do it most certainly has.  In this article we’ll be taking a look at the three most commonly used mould […]

How I powder coat rifle bullets, from start to finish. Powder coat, water quench and gas check. John's Hand LoadingJohn has been shooting since he was a kid and is now a middle aged man. He likes shooting rifles and handguns, reloading, bullet casting and the outdoors. He believes in God, freedom and a good […]

Cast Lead 155gr 7.62×39 out of a SKS. Handloads with 155gr cast powder coated bullets. Using Fedral large rifle primers, Winchester brass and IMR 4198. Quest for the perfect load

I decided to try casting 44 magnum / 44 special bullets by using two molds during the same casting session. The molds are the Lyman 429421 (the Elmer Keith SWC), and the Lee 429-200-RF.

Casting .44 Keith bullet and powder coating