I originally wanted a bullet mold which I could use to cast a heavy 300blk bullet which was easy to cast, coat, load, and shoot for plinking in my 300 blk AR15 at subsonic speeds. I tried a few of the already available molds but had feeding issues, undersized issues, boat tail issues, or issues […]

Sharpshooter USA Buckshot Moulds Casting your own buckshot is one of the simplest and most economical ways to save money as a reloader, particularly if you’re a big shotgun fan.  That being the case, why don’t more people do it? There are a number of reasons, but the biggest factor is probably that there just […]

600 gr. 458 SOCOM Subsonic Loads (Slow Heavy Hard Hitters!)

300 BLK Cast Bullet For Dummies (NOE 310-225-RN) Start to Finish!

In this video I show most of the steps from start to finish on how I make one of my favorite milk jug exploding 45-70 loads. All the details should be in the video, but if you have any questions, feel free to leave a comment here and I will respond as quickly as I […]

In chapter one of this series we made some brass jackets out of discarded .22LR casings using the Blackmon jacket swaging die.  In chapter two, we're going move on to the next step in the process of swaging bullets; making lead cores.

I am casting round balls for loading in my revolvers. I purchased these single ball brass molds from Jeff Tanner at ballmoulds.com I'm looking forward to loading these to shoot in .44 Special, .44 Magnum, and .45 Colt as both single ball and duplex loads.

How I melt Zinc wheel weights and how I cast them. This is 3 movies combined watch all of it I use a Lee aluminum mold

My first casting session with the NOE HTC358-133-RN two cavity mold for 9mm. This is also my first casting session with the PID I recently assembled.

Choosing a Respirator for Bullet Casting About a year ago I received some bad news from a good friend.  A long-time bullet caster who had been to the Dr. for his annual physical; he was informed his blood had tested high for dissolved lead.  It’s a well established fact that lead not only causes neurological […]

I go through the entire process of casting, powdercoating, loading, and shooting some hard cast round nose bullets using the high quality NOE bullet mold for my 10mm handguns.  I had wanted a round nose bullet for 10mm plinking loads.  Something that would feed simply and flawlessly in each of my 10mm handguns and carbines.  This bullet mold seems to do the trick.

Today, I show in this video the entire process from start to finish how I cast, powder coat, load, and shoot some 250gr coated cast lead hollow points in the 44 magnum. This is one of my "go to" loads for blasting milk jugs without much recoil.  These loads are perfect for maximum explosion with minimal recoil--great for those milk jug duels with the buddies.  Got questions?  Feel free to leave me a comment below, and I will do my best to answer it!

Ladle pour / lead dipper casting using the Lyman Big Dipper Master Casting kit and the Lyman 429244 bullet mold. This is the equipment I used when I first started casting, but I've never used the 428244 mold until today.

315 Gr 338 Spectre Subs -- Now I have ammo!

JT Bullet Moulds’ .670 Round Ball Mould Today I’d like to discuss a round ball mold I purchased from a small, independent manufacturer called JT Bullet Moulds.  The owner, Jeff Tanner, is located in England and produces these from solid brass.  What makes Jeff’s molds unique though, is that they’re essentially made to order in […]

3 months ago I posted a video about "My New Mobile Bullet Casting Bench". Today I finish the upgrades. I added the NOE Lead Pot Mould Guide. I also added ventilation for my casting pot.

LEE APP Press w/ Some Cool Accessories by NOE

I have always used card tables or other temporary tables to do my bullet casting on. I have now upgraded to a dedicated bench, and this one comes with storage for all of my bullet molds and other casting gear.

I am casting 000 buck, which are .360" round balls, for loading in both shotgun and my revolvers. The mold is from Sharp Shooter USA.

This video is a VR to the Tacopocalypse challenge issued by Full.Lead.Taco. His YouTube channel recently crossed over the 2,000 subscriber mark and that prompted him to do a giveaway. Taco is one of the nicest and most generous guys you'll ever talk to, and he has some of the best prize options of any giveaway I've ever seen. This video features bullet casting over an open flame, making bullet lube from bacon grease, pan lubing, reloading, and range time with my .44 Magnum.

For all of you who need a little fart load for a squirrel... or maybe a mouse?

I haven't been able to do any bullet casting, reloading, or make any trips to the gun range in about 3 months. I finally had a chance to do all three, so I grabbed the mold for one of my favorite bullets, the Lyman 429421, which is Elmer Keith's famous bullet for the .44 Special and .44 Magnum.

How I powder coat rifle bullets, from start to finish. Powder coat, water quench and gas check. John's Hand LoadingJohn has been shooting since he was a kid and is now a middle aged man. He likes shooting rifles and handguns, reloading, bullet casting and the outdoors. He believes in God, freedom and a good […]

So guys (and gals), I’ve recently hit the YT 2000 subscriber mark and wanted to do something really cool for a video, and a challenge, and a giveaway.  Recently I’ve been saving up some money and raising some funds via my Patreon patrons to purchase some cool prize options.  I’ve been able to pick up […]