Prepping New Brass
8
03:03

Prepping New Brass

Running through some new brass that I picked up from Starline. 243 OutdoorsMy name is Josh and I love Firearms and Freedom.  I started 243 Outdoors as a YouTube Channel back in 2015 and have branched out to other media sites.
897863287_1280x720[1]
5

Lee Breechlock Pro

For a while I have been considering an addition to my Lee Breechlock Challenger single station press to speed up my production rate. I’m not such a high volume shooter to justify a Dillon or Hornady AP, but when club matches start back up I will put a lot of lead downrange in a short […]
First time casting
11
06:59

First time casting

My first good bullet casting session. Used a Lee TL356-124-2r 9mm and a Lee TL452-230-2r bullet mold. Once I got use to it, it was very fun. Jesse B OutdoorsGuns, Gear, Knives, and Outdoors. These are some of my favorite things besides my family.
Lee Precision Universal Decapping Die
6
08:44

Lee Precision Universal Decapping Die

Setup and installation of the Lee Universal Decapping Die. A great little die to get your young ones active and learning. Also get those primers removed in the process. Squatch ReloadingThis channel focuses on the guy or gal who is thinking about getting into reloading.  There is a lot of information out there however, some […]
3FCB917E-204D-4898-B4F1-6348997010FB
13
05:54

Lee Auto Drum Powder Measure Binding Fix

While developing a load with Titegroup I ran into issue with my Lee Auto Drum Powder Measure binding causing the action rod to bend when at low charge weights. Here’s the workaround I came up with to quickly ease the binding. The Range SquirrelI owned a Marlin 60 since 1987, but never really got ‘into’ […]
Lee Auto Breech Lock Pro Press
16
21:09

Lee Auto Breech Lock Pro Press

After having this press for a few days, I am going to show you the operation of this press and my first thoughts. So far I am very happy with it. I have had a few minor issues. This press will require a little tinkering and adjusting to make it run right.
Making 9’s
5
16:59

Making 9’s

Today is the day. First time casting bullets. I am using a Lee 4 20lb pot. A NOE HTC358-133-RN-BO5 2 cavity mould. I have several pounds of processed wheel weights that I will be using. My first session this morning, about 50% were acceptable, and the second session after lunch about 85-90% were looking good.