Description

This jig enables the full seating and proper joining of the Svarog “Special” Wads with the Italian and Paradox shotgun slugs.

The “Special Plastic Compensator” wads are designed to be seated in the Svarog 12 gauge “Italian” and “Paradox” slugs when those slugs are cast with the “Special” base pin. Alignment is essential for successful and consistent wad seating. The suggested tools for joining these proprietary tail wads with the slugs are the Seating Clips and the Wad Seating Die designed and manufactured by Nick Ross. Using this 3D printed jig in combination with those tools ensures that the slug, wad, and seating clips stay in alignment during the seating process.

The lid of the jig is designed to be inserted into the top of the reloading press ram, like a shell holder, to provide a flat surface to place the bottom of the jig on while seating the wad. The jig serves as a storage cup for the Seating Clips when not in use.

View this jig in use with these tools in this video from FortuneCookie45LC:

New Slug Jig For The Russian Paradox And Hydrant Slugs

*Note: There are no seating clips included with this jig; the seating clips must be ordered separately.

3D printed from PETG (polyethylene terephthalate glycol) in USA.