In this video we load, test and discuss the results of 35 Remington loaded with H4198. I hope you enjoy it, maybe even learn something, and thanks for watching. God bless you all.

Shooting the 357 Magnum Hollow Point (loaded to ~1100 fps), 1:16 alloy with a BHN of 10.4 into Clear Ballistics Gel from my Taurus 66.

Shooting the 357 Magnum Hollow Point (loaded to ~1100 fps), 1:25 alloy with a BHN of 8.7 into Clear Ballistics Gel from my Taurus 66.

Shooting the 357 Magnum (loaded to just over 38 Special +P), Hollow Point, 1:16 alloy with a BHN of 10.4 into Clear Ballistics Gel from my Taurus 66.

Shooting the 357 Magnum (loaded to just over 38 Special +P), Hollow Point, 1:25 alloy with a BHN of 8.7 into Clear Ballistics Gel from my Taurus 66.

Shooting the 357 Magnum (loaded to just over 38 Special +P), Hollow Point, 1:40 alloy with a BHN of 8.0 into Clear Ballistics Gel from my Taurus 66.

Loading up some 38 Special +P on my Lee Loadmaster with Alliant Bullseye, Winchester primers, and Lee 358-158-RF bullets. Jesse B OutdoorsGuns, Gear, Knives, and Outdoors. These are some of my favorite things besides my family.

A redo of the test a performed a couple days prior shooting the 38 Spl +P, Hollow Point, 1:40 alloy with a BHN of 8.0 into Clear Ballistics Gel from my Ruger LCR.

Shooting the 38 Special +P cast with a hollow point from the 1:16 alloy with a BHN of 10.4 into Clear Ballistics Gel from my Ruger LCR.

Shooting the 38 Spl +P, Hollow Point, 1:40 alloy with a BHN of 8.0 into Clear Ballistics Gel from my Ruger LCR. This was the very first test I shot in this series.

Shooting the 38 Special +P cast with a hollow point from the 1:25 alloy with a BHN of 8.7 into Clear Ballistics Gel from my Ruger LCR.

Shooting the 38 Spl +P, solid nose (RNFP), 1:40 alloy with a BHN of 8.0 into Clear Ballistics Gel from my Ruger LCR.

This is the seventh video in the Powder Coated Cast Lead Hollow Point Bullet Testing series, which is a long experiment testing powder coated cast lead hollow point bullets made from various alloys and fired at various velocities. In this video I have a little fun using various methods to measure the hardness of the lead alloys used to cast the bullets that will be used for this test.

Oh the humanity!!!!!! But I couldn’t resist. The hardest part was figuring out the shot timer. Guess I should have had my grandson help me. Anyway, here you go. .38 Special with Lee 158 RF out of a Taurus 66 6″ barrel PS: The names have been changed to protect the innocent!!! Mike TreenCasting, loading […]

This is the third video in the Powder Coated Cast Lead Hollow Point Bullet Testing series, which is a long experiment testing powder coated cast lead hollow point bullets made from various alloys and fired at various velocities. In this video I cast six different bullet styles from five different alloys.

I needed a way to consolidate and compare the information from all of my powder coated cast lead hollow point tests.

This fourth video in the Powder Coated Cast Lead Hollow Point Bullet Testing series shows various examples of things to watch out for when inspecting your cast bullets. Inspecting your cast bullets is essential for accuracy and performance. It is not uncommon to reject 5%-20% of the bullets from a casting session.

Potent Hog Medicine? Is 357 Magnum 158gr at 1248fps from a 6inch barrel and 1489fps from a 16in barrel, leveraction at 75 yards or under potent hog medicine? Leave a comment and tell me what you think. Thanks Loads of Bacon for bullets.   Dayattherange.com mr.revolverguywww.dayattherange.com

I'm reloading the hollow point and solid bullets for the first two tests in the Powder Coated Cast Lead Hollow Point Bullet Testing series. This series is a long experiment testing powder coated cast lead hollow point bullets made from various alloys and fired at various velocities. In this video I go through the process of figuring out the Unique powder charge for the .38 Special +P, and then I load the bullets.

Trying some unconventional/non popular methods/powder selection here, as I couldn’t find any video of someone using Tite Group in 357 Magnum. ChicowizeI’m a Rookie Reloader. I started in July 2018 with my first press being a Dillon XL650 and recently I’ve joined the community of casting my own projectiles and loving it as much as reloading. […]

Mail call from Georgiaboy44

I got a package from Loads of Bacon of his world renown coated and bacon lubed bullets. Normally I load my medium velocity 357 Magnum rounds with HS-6. Just upon completing some 10MM testing with BE-86 and like the performance and velocity I was seeing with it I decided to use BE-86 in 357 Magnum.

This is the fifth video in the Powder Coated Cast Lead Hollow Point Bullet Testing series, which is a long experiment testing powder coated cast lead hollow point bullets made from various alloys and fired at various velocities. In this video I powder coat all of the bullets that will be used for this test.

A quick chat over coffee about my start to bullet casting.