Finally a solution- One thermal shield solution for all three Annealeez wheels! Stops melting wheels! Hazzbro’s HideReloader, shooter, flintlock builder

Finally tackling the Annealeez 2.0 wheel melting issue especially common to smaller cases. First up is a lower wheel solution that also greatly improves the upper wheel issue. Next will be a similar modification to the upper…if it proves necessary. 300 blackout testing with more to come. Please comment if you are interested in this […]

Another good mod to the Annealeez 2.0 - Thanks goes out to Gundog55!

Challenges of annealing 300 Blackout brass cases on the Annealeez 2.0. Once setup it cranks though 300 cases with “Ease”. Use of Tempilaq 650F testing fluid. Hazzbro’s HideReloader, shooter, flintlock builder

More details on installing magnets on the small case and large/magnum case wheels on the Annealeez 2.0

Annealing 6.5 Grendel Brass with the Annealeez 2.0 and small case wheels

Testing Tempilaq 650F using torch type annealing machines – burning, conduction, and accurate reading of the result. Hazzbro’s HideReloader, shooter, flintlock builder

Lessons learned from Annealing and the L.E. Wilson case trimmer

Annealeez 2.0 counter mod with Temilaq 650F temperature fluid use for Winchester head stamp 308W brass. Hazzbro’s HideReloader, shooter, flintlock builder

Annealeez 2.0 counter mod running more than 260 cases. Max fill on the hopper for .223/5.56. Can it do it? :) Hazzbro’s HideReloader, shooter, flintlock builder

Annealing Lake City 2018 Brass in Bulk (160+), using Tempilaq 650F, and comparing to other head stamps and years. Hazzbro’s HideReloader, shooter, flintlock builder

Annealeez 2.0 counter mod with Tempilaq 650F temperature fluid use and more than 160 cases annealed. Hazzbro’s HideReloader, shooter, flintlock builder

Annealeez 2.0 Brass Case Annealing Counter Modification. For Reloaders who anneal....a lot :) First of a series on Annealing, Lessons Learned, Counter Mod, and Annealeez Machine.

Just got this Annealeez machine. I set it up using templack 750 degrees. I did not show the set up in the video but it was easy. Works great!