Shooting the Barnes .44 Magnum 225gr HP over the chronograph and into a cool penetration test.

Today we're testing the Barnes 139gr LRX out of my Remington 700 ADL with the Magpul Stock. Is this a Good Alaskan Caribou Load?

Looking at the Barnes original 220 grain JSP Leverguns 50Most of our videos are about lever action rifles and other cowboy guns, including carbine and shotguns, sixguns, black powder, hunting, outdoors, and primitive skills.

Comparing bullet penetration of steel, starting with a 525 grain lead hard cast bullet. Next is a 550 grain hard cast bullet, and then the Barnes 535 grain banded solid bronze bullet. Last but not least is the 300 grain Barnes original bullet. Leverguns 50Most of our videos are about lever action rifles and other […]

Shooting the .338 Winchester Magnum with Barnes Tipped TSX 210gr.

Trying out some new loads using Davide Pedersoli Soule Sights to try to squeeze every last ounce of accuracy out of this gun bullet powder combination. Trying some Trail Boss for light loads, and some H322 for some high velocity loads with the Barnes 300 grain bullet These Creedmoor sights are the ones I bought for this gun when I had it re-barreled to 50-110 almost 20 years ago.

45-70 loaded to the max, 45-90 not a maximum load, 45-90 tried two different loads, these are very tough bullets and even at these outrageous velocities they performed very good, penetration was outstanding

Coming up with a load for the 50-110 Winchester, a new reproduction custom Winchester 1886 chambered for the 50-110. This gun is made with high strength modern steel; using the 450 grain Barnes bullet. Leverguns 50Most of our videos are about lever action rifles and other cowboy guns, including carbine and shotguns, sixguns, black powder, […]

Shooting the 348 Ackley Improved into wet paper to see expansion and penetration. It expanded to just over an inch, and penetrated 9 inches.

Comparing the 300 grains Barnes bullet 2800 FPS, versus the 500 grain Woodleigh 50 Alaskan /50-110 bullet at 2100 FPS, in wet paper for penetration and expansion.

Shooting the Glock 21 with Barnes TAC-XPD +P 185gr over the Chronograph and a Cheesy ballistics Test...

Shooting and Chronographing the Smith and Wesson 2.0 5" Barrel with Barnes Tac-XPD 115gr 9mm +P

I work through some load development with the Sierra 95 grain Match Kings using Reloder-16 and 85 gr Barnes Match Burners using H4350 and Reloder-16. Some results are good, some not so good.

Recently I received some Barnes bullets from Preacher's Day Off and it is time to load them up. We are using our once fired Starline Brass that was recently used in the Fort Scott Munition videos. Going through all the steps to load this ammo. Due to some recent rainfall we won't be able to shoot these rounds today.

This is a video about load development with the Hornady 75 grain Match bullets using Varget and the Barnes 85 grain Match Burners bullets using Reloader-17 powder. I am shooting at 100 yards.

This is a video about load development with the Hornady 80 grain ELD Match bullets using Varget and H4350 powders. I am shooting at 100 yards.

I go through my process for reloading for the 224 Valkyrie. I reload Hornady 75 Grain Match Bullets with Varget and Barnes 85 Grain Match Burner Bullets with Reloder-17. The Big ManHere at The Big Man’s Outdoors, my family and I enjoy all kinds of outdoor activities..  Hunting, Fishing, Shooting, Camping, Hiking, Fire Sitting, and […]

My results from shooting the 224 Valkyrie with Hornady 75 Grain Match bullets with Varget and 85 Grain Barnes Match Burners bullets with Reloder-17. The Big ManHere at The Big Man’s Outdoors, my family and I enjoy all kinds of outdoor activities..  Hunting, Fishing, Shooting, Camping, Hiking, Fire Sitting, and pretty much anything that gets […]

I planned a trip with my family to go out and shoot, so I set up a full size IPSC silhouette at the 1,000 yard line got the rifle on target and turned over the Uintah Precision chambered in 6.5 Creedmoor to them! It was a very windy day holding 5-10 MOA for wind to […]

Here is the summary of the first rounds I loaded. Bullets and brass weight sorted, brass shoulder bumped and neck expanded with a mandrel to get .001” tension. Three charge weights each with two overall lengths. 2.810 and the long which was set .020” off the lands

Here is my brass prep process that has gone beyond the standard resize and decap. I weight sort some bullets and brass in search of some ragged hole groups. I talk about my expanding mandrel and neck turner I will be using soon and talk about the idea behind this series. Loading up some 140g Barnes match burner bullets for 6.5 Creedmoor that I may use for competition shooting.