TreeTopFlier

Just a starting video to talk about magazines for the 6mm Max cartridge. This also relates to the 350 Legend. I spend a brief amount of time giving an overview of the cartridge as well. TreeTopFlierI am retired USAF.  I reloaded some as a kid, mostly shotgun, then stepped away for many years.  After I […]

In this video I go over the Ram Swage kit by Lee Precision. This is a great primer pocket crimp removal tool for large and small primers. Made to be operated in a press you likely already have. I hope you find the video helpful. TreeTopFlierI am retired USAF.  I reloaded some as a kid, […]

Parts updates, fixes and tips for the Lee Precision Ultimate Turret Press. TreeTopFlierI am retired USAF.  I reloaded some as a kid, mostly shotgun, then stepped away for many years.  After I retired and could put down roots I got back into it again and over time I have found that I like reloading more […]

In this video I take a look at the latest version of the Challenger III single stage, breech lock press from Lee Precision. I make some dummy 308 rounds and check for consistency. The press really surprised me. TreeTopFlierI am retired USAF.  I reloaded some as a kid, mostly shotgun, then stepped away for many […]

NEW Micrometer style seating stems for seating dies, Factory crimp dies and an entirely new line of rifle micrometer seating dies. TreeTopFlierI am retired USAF.  I reloaded some as a kid, mostly shotgun, then stepped away for many years.  After I retired and could put down roots I got back into it again and over […]

A video to share how I get great accuracy from my powder measuring components from the powder measure to the case with a few simple tips and treatments. TreeTopFlierI am retired USAF.  I reloaded some as a kid, mostly shotgun, then stepped away for many years.  After I retired and could put down roots I […]

This video is to show some of the priming problems with the Ultimate Turret Press and to share information about the fix from Lee. Problems so far are broken primer levers and levers hanging up, flipping primers etc. Hope this helps get the word out. TreeTopFlierI am retired USAF.  I reloaded some as a kid, […]

Just wanted to give you guys a look at the KMS² UFO XT light kit for the Ultimate turret press. This kit has a large tool head that really shades the work area so its nice to be able to add some lighting on press. TreeTopFlierI am retired USAF.  I reloaded some as a kid, […]

Part 2 on Lee Precisions Ultimate Turret Press. A better look at what makes it tick and new parts to solve the index/ over rotation problem. TreeTopFlierI am retired USAF.  I reloaded some as a kid, mostly shotgun, then stepped away for many years.  After I retired and could put down roots I got back […]

I have been taking a look at the brand new Lee Ultimate Turret press and putting it through its paces. This intended to be just introduction to the press I do get into quite a bit of detail. I plan to make a more detailed video in the future. TreeTopFlierI am retired USAF.  I reloaded […]

This video was requested by a viewer. Wanted to see a walk through of my reloading space and maybe what has turned out to be “best practices” for me. I have simple basic gear in a small space so I hope this is useful to someone. TreeTopFlierI am retired USAF.  I reloaded some as a […]

We take a look at the new auto drum powder measure by Lee Precision. Version 3.0. PN 92003. This will be the converted version from 1.0 to 3.0 using the Auto drum update kit. PN 92084. I’ll try to give you a good look at it to see what you think. TreeTopFlierI am retired USAF.  […]

In this video I assemble 308 Winchester “dummy” cartridges on the Lee Classic Turret press and on a 1968 RCBS rock chucker single stage press. I dialed in shoulder bump to really test the presses. The completed cartridges where measured and compared. I found the results to be VERY SURPRISING. Hope you enjoy the video. […]

In this video I cover using a Lee 380 Auto crimp die to perform push through sizing for cases based on the 223 5.56 cartridge. This process will help restore loose primer pockets depending on how bad they are. TreeTopFlierI am retired USAF.  I reloaded some as a kid, mostly shotgun, then stepped away for […]

In this video we take a look at Hornady’s Lock-N-Load neck turning tool. I used it on some homemade or converted 300 Blackout brass to illustrate how much it can improve the consistency of the converted brass. The tool is great to improve any conversion/wildcat brass. I thought the converted brass would really stand out […]

In this video I take a look at Lee’s Breech Lock Reloader, single stage, C shaped press. I make some fake rounds and measure them for quality. I was pleasantly surprised with the results. Hope you find it interesting. TreeTopFlierI am retired USAF.  I reloaded some as a kid, mostly shotgun, then stepped away for […]

In this video I share my DIY range – travel reloading kit. This is just my take but I thought my viewers may find it interesting and maybe find some takeaways. I use the Lee hand press but other presses may be used. TreeTopFlierI am retired USAF.  I reloaded some as a kid, mostly shotgun, […]

After using the Lyman Brass Smith powder measure for a year, it’s time to share my observations, thoughts and tips. It’s a little long but hopefully informative. Thanks for watching! TreeTopFlierI am retired USAF.  I reloaded some as a kid, mostly shotgun, then stepped away for many years.  After I retired and could put down […]

I found that the Lyman VLD 22 deg inside chamfer tool does a great job on .223/5.56 brass primer pocket crimps. TreeTopFlierI am retired USAF.  I reloaded some as a kid, mostly shotgun, then stepped away for many years.  After I retired and could put down roots I got back into it again and over […]

(Part 4) In this series I show reloading with basic tools and provide information to help a beginner get started. The idea is to show that you can reload without expensive tools or a dedicated space. Here are a list of items you will see in the series.

In this series I show reloading with basic tools and provide information to help a beginner get started. The idea is to show that you can reload without expensive tools or a dedicated space.

(Part 2) In this series I show reloading with basic tools and provide information to help a beginner get started. The idea is to show that you can reload without expensive tools or a dedicated space.

In this series I show reloading with basic tools and provide information to help a beginner get started. The idea is to show that you can reload without expensive tools or a dedicated space.

Subscriber update, and how The Reloaders Network provides viable options for the future of reloading content.