9mm Luger (LoB)

Here are four videos about the Beretta 92S.  I have put all four videos together into this one post.

I field strip and disassemble my Hi-Point C9, and then slug the barrel so that I can properly size my cast bullets.

My first casting session with the NOE HTC358-133-RN two cavity mold for 9mm. This is also my first casting session with the PID I recently assembled.

Powder coating session for my recently cast 9mm bullets. I cast these bullets from the NOE HTC358-133-RN mold.

I recently cast bullets for 9mm with the NOE HTC358-133-RN mold, powder coated them with Eastwood Lime Green, and sized them to .358". I am now working up a load with Unique powder, which is a challenge since there is no published load data for this or a similar bullet. I am shooting these from my Beretta 92S.

I recently cast bullets for 9mm with the NOE HTC358-133-RN mold, powder coated them with Eastwood Lime Green, and sized them to .358". I am now working up a load with Alliant e3 powder, which is a challenge since there is no published load data for this or a similar bullet. I am shooting these from my Beretta 92S.

I came across some AMMOLOAD and IMT 9mm brass that has what appears to be a sleeve (or step or ledge) inside. I assume this is there to reinforce the case head and to prevent bullet set back, but I want to know if it presents a safety issue for reloaders as it reduces the case capacity, and as a result could cause high pressures. I've read that cases with MAXXTech and FM (Freedom Munitions) have a similar extra amount of brass in the case.

I am casting 000 buck, which are .360" round balls, for loading in both shotgun and my revolvers. The mold is from Sharp Shooter USA.

I previously cast up some round balls to load into my .44 Magnum, .44 Special, .45 Colt, .45 Auto, .357 Magnum, .38 Special, 9mm, and .380. Now it's time to get them powder coated. I also load the initial test loads of .44 Special with Unique and Trail Boss.

Today we're taking a look at the "NAS3 Two-Piece Shell Case Technology". Do they work? Will they work with cast bullets? Stick around to the end for details on a giveaway!