Microscope Stand for the Lee Lead Hardness Test Kit

Microscope Stand for the Lee Lead Hardness Test Kit

$29.99

Microscope stand for use with the Lee Lead Hardness Test Kit, product 90924

  • • Enables hands-free operation of the Lee Pocket Microscope from the Lee Lead Hardness Test Kit
  • • Adjustment knobs allow for 1/2″ of vertical travel
  • • Includes: microscope stand, microscope dust cap, “V” block cradle handle
  • • Free shipping

 

SKU: MS-LHTK Category:

Description

The Lee Lead Hardness Test Kit is a great system for checking and verifying the hardness of your casting alloy, but holding the Pocket Microscope in perfect depth and alignment while trying to measure the impression and also get enough light can prove challenging. This microscope stand will enable hands-free operation of the Lee Pocket Microscope. The microscope will be held steady while both of your hands are free to position the bullet or ingot and adjust the lighting for a much more easy and accurate measurement.

The Pocket Microscope can be installed at any desired height and then secured by finger tightening the collet nut. The adjustment knobs allow for 1/2″ of vertical travel. The Pocket Microscope is not modified or damaged by the use of this stand, however removal or relocation of the Pocket Microscope pocket clip may be necessary to achieve the desired installation height.

Your order includes the 3D printed microscope stand, a dust cap, and a “V” block cradle handle. The dust cap is included with the stand for users that desire to leave the Pocket Microscope installed for extended periods of time.

A handle is included with a loop that is designed to hold the “V” block cradle. This handle is convenient for moving and positioning the indented bullet to the correct position under the Pocket Microscope.

Caution: Do not overtighten the collet nut without the Pocket Microscope installed as the collet flanges may be damaged or broken.

Note: Lee Lead Hardness Test Kit not included.

This product is not designed, offered, or endorsed by Lee Precision.

3D printed from PETG (polyethylene terephthalate glycol) in USA.


Get your Lee Hardness Test Kit here:

 
Navigate to the:  Store | Cart | Checkout

*When offered, Free Shipping is limited to mailing addresses within the United States and APO/FPO addresses. Contact us if you desire to have your order shipped to a different country.

You may also like…