‘In the beginning…’ I started casting and ‘Lube-Sized’ my rifle/pistol projectiles…back then, the choice of lube was a hot topic and there were many heated exchanges about which lube would allow particular advantages. Some lubes required a ‘heater’ to be installed under the Sizer, some not. ‘Leading’ of the barrel was a problem when the […]

Looks like I squeaked this video upload just in time before getting my 17th video deleted and a YouTube Channel strike. I can’t upload to YT for the next little while, but I will still try to upload to TRN. Here you go, Enjoy! Full.Lead.TacoI love guns, tacos, and lead. I use the guns. The […]

I am posting this video on behalf of Larry Palmer with his permission. I love how Larry makes a makeshift oven using a metal toolbox, a thermometer, and a homemade rocket stove. Great job Larry! Full.Lead.TacoI love guns, tacos, and lead. I use the guns. The guns eat lead. And I eat tacos. The videos […]

338 Spectre Cast 250gr Subsonic Bolt Gun Loads (NOE341-245-SP)

315 Gr 338 Spectre Subs -- Now I have ammo!

In today's video, I am powder coating my recent cast 9mm rounds. I am using Harbor Freight Red powder. I am having trouble with the powder sticking to the bullets. After watching several videos from authors of The Reloaders Network, I'm still not getting the results I want. All the rounds are usable, but they just don't look the best. Some have thin and thick spots, and some have bare spots. Factors such as weather, humidity, and types of plastic containers could be affecting my results. All the rounds were sized to .356 using a NOE Sizing Die.

Part four of my first bullet casting experience. In this episode, I document the reloading of my .358 – 158 grain bullets, cast from an NOE mold. JCM45

Mail call from Georgiaboy44

Having fun lobbing lead! Bullets made with NOE311-175-FN (Saeco315 clone) mold.

Hey guys! Been a little since I made a “start to finish” video–and finally caught my breath a little from the busyness of summer, enough to throw together a video.  I was actually searching my channel for my 9mm plinking ammo video a week or two ago, when I realized I never ended up editing […]

I recently cast bullets for 9mm with the NOE HTC358-133-RN mold, powder coated them with Eastwood Lime Green, and sized them to .358". I am now working up a load with Unique powder, which is a challenge since there is no published load data for this or a similar bullet. I am shooting these from my Beretta 92S.

In this video I show the bullet lubing and sizing methods I used for my first batch of cast bullets.

Hello, This is a video I posted on YouTube on April 26, 2018. It shows a casting session with 3 molds, one of which was given to me as a give-a-way on a Full.Lead.Taco/Loads of Bacon live stream, thus the title. This is the first attempt at casting with the Taco Mold (358477) 150 grain semi […]

My First Bullet Casting Session - Part One

This is a Video Response to Full.Lead.Taco's Tacopocalypse Video.

Got a little mail call this morning. Kyle LuskJust an ordinary average guy!

One of my reasons for getting into reloading and casting.. Hope it helps you as well..

Tried the New NOE HOLLOW POINT MOULD. Put in long pins for deeper point, changed to a shorter pin as wasn't coming out as I intended. Mould had been cleaned and smoked, went up and down with temp, no avail. Finally added a softer alloy which did the trick.

Tres Amigos Tres Molds Tres Rifles We each sent the others a batch of cast bullets for testing in different rifles, different temperatures, and altitudes. But, all with the same loads. Here are our results.

Return of The 9mm Video! (NOE HTC358-133-RN Bullet Mold)

Today I'm going to test how well Ramshot True Blue flows through my powder measure.

F.L.T. Bday Party Casual Shoot 2019

I was finally able to get to the range and gather some velocity data using Ramshot True Blue by Western Powders. The two bullets used were the Lee 356-124-2R and the NOE HTC-358-133-RN. The lighter Lee bullets seemed to prefer a lighter charge while the heavier bullet from NOE preferred a higher charge. This goes […]

In this video we test for bullet expansion with our NOE hollow point bullets cast from Clip on Wheel Weight alloy. The test doesn't go as planned.