983941203_1280x720[1]
6
16:06

Using the Lee Value Turret Press

In this video I show how I use the Lee Value Turret Press to make .45 Auto cartridges. I show how to remove and install a turret and how to lube the ball bearing and turret with oil. The Lee Value Turret Press is a less expensive 4 hole turret press that is generally used […]
Powder Measure on a Turret… why no thanks
12
13:51

Powder Measure on a Turret… why no thanks

My thoughts on adding a powder measure on a Turret Press. Answering some of the comments and questions I received from a a previous video. Squatch ReloadingThis channel focuses on the guy or gal who is thinking about getting into reloading.  There is a lot of information out there however, some of the terms and […]
Redding T7 Turret Overview – My Setup
7
14:24

Redding T7 Turret Overview – My Setup

A quick rundown and review of the Redding T7 Turret Squatch ReloadingThis channel focuses on the guy or gal who is thinking about getting into reloading.  There is a lot of information out there however, some of the terms and equipment are a little intimidating to most.  The intent is to break things down with […]
Reloading 223   Powder   Seat  Crimp   Redding T7 Pt 3
4
14:52

Reloading 223 Powder Seat Crimp Redding T7 Pt 3

Finishing up the 233 Remington Series on the Redding T7 Turret. Squatch ReloadingThis channel focuses on the guy or gal who is thinking about getting into reloading.  There is a lot of information out there however, some of the terms and equipment are a little intimidating to most.  The intent is to break things down […]
Reloading 223 – Sizing – Redding T7 – Pt 1
10
22:13

Reloading 223 – Sizing – Redding T7 – Pt 1

Introduction to reloading .223 In this video we are going to focus on lubrication of the cases and setting up the RCBS FL Sizing die. We will also cover 2 case lubricants and the process and importance of proper case lube. Squatch ReloadingThis channel focuses on the guy or gal who is thinking about getting […]
Great Items From The Reloaders Network Store
9
03:28

Great Items From The Reloaders Network Store

James and Nick Ross have some great creations and supplies plus the very fine Russian shotgun slug molds at The Reloaders Network Store… Note that with this device, we can put the handle anywhere on the turret where Lyman only gives us 2 positions. It’s worth dropping over there for a look… FortuneCookie45LCFortuneCookie45LC started posting […]
Redding T7 Loading 358 Legend
8
14:56

Redding T7 Loading 358 Legend

This video focuses on the T-7 press, as I load some test rounds for the 358 Eagle, the modified 350 Legend. The only real difference is the barrel diameter, allowing us to shoot the many 358 projectiles rather than the limited 355-356. JH586My name is Jamie, and I’m Lisa’s husband, Jay and Amanda’s dad, and […]
I Got Squatched!
9
05:14

I Got Squatched!

In this video, I show a fantastic gift from a couple of our dear friends. Oh, and at the end, I found Kyle’s frogs!!?????? JH586My name is Jamie, and I’m Lisa’s husband, Jay and Amanda’s dad, and Rigby’s PawPaw. I’m relatively new to reloading and certainly to creating content. I’ve only been reloading since November […]