In today’s video we see how much ballistic gel it takes to stop a 700 Nitro! I hope you enjoy the video and thanks for watching!
Finally a solution- One thermal shield solution for all three Annealeez wheels! Stops melting wheels!
Thanks for watching, please hit the Like, Subscribe and Bell notification
Best decapping die ever!?
Today, Taco and Jason chat about vehicle preparedness as well as their top 5 favorite EDC conceal carry handguns
Thanks for watching
223 Rem – 69gr Nosler Custom Competition AR15
I’m testing the 75gr Hornady BTHP with Cannelure using AR-Comp. We’ve got a known-good charge, so I want to test seating depth in this video. I also make a custom seating stem for my Lee seating die and run into some strange concentricity issues.
Will have to revisit this need more slugs, thanks for watching
I recently retired another pair of steel-toe boots, and, as is my custom, decided to give them a ballistic send-off. I’ve shot these with a variety of handgun and rifle rounds in previous videos, so this time I decided to try some shotgun rounds.
Stay Until The End!
.22 short, .22 long and .22 LR in a Clear Ballistics Gel Block from a Henry H001.
In today’s video we have some fun with a 41 magnum! I hope you enjoy the video and thanks for watching!
Shooting the First 50 Rounds of 38 Special with 9mm Bullets.
Precision Reloading has not been considered even remotely possible in the "less than robust" Lee APP Press. The two have been thought of as being mutually exclusive. Let's think outside the box in this video and see if FL sizing shoulder bumping that is the hallmark of precision reloading as well as precision bullet seating yielding low runout ammunition, can be accomplished using the inexpensive APP Press. Let's find out if the APP Press breaks in the shoulder bumping attempts or if heresy is dispelled...
Flash hole size? Standard vs High Standard? 0080” vs 0060” what to watch out for! Warning! Decapping pin bends and brakes. Flash hole size studies.
Loading 38 Special with 9mm Bullets for the First Time.
In today’s video we blast a car with a 700 Nitro! I hope you enjoy the video and thanks for watching!
Hiviz Shooting Systems Install and Shooting for the Ruger Gp100. These are great sights to add to your revolver.
The second time out with the Type 99 #352, firing shots number 6 through 10 at steel targets at 150 yards.
Testing Reloading and Casting Haul Components. Testing the primers, powder, and bullets that I made from the lead and molds I got. I’m running them through my Canick TP9 SFX.
A blustery day at Johnson's Mosquito Ranch with plenty of shooting fun. Mark and I plinked around with reduced 30-30 loads in our 94 Winchesters, tried a recently purchased GP100, hit steel with the 32-20 Contender, put a few more rounds through a Type 99, and fit in some time to evaluate two 8x57 Mauser loads.
Thanks for watching