I go through the entire process of casting, powdercoating, loading, and shooting some hard cast round nose bullets using the high quality NOE bullet mold for my 10mm handguns.  I had wanted a round nose bullet for 10mm plinking loads.  Something that would feed simply and flawlessly in each of my 10mm handguns and carbines.  This bullet mold seems to do the trick.

Assembling two AR pistol lowers. One of the lowers is the Foxtrot Mike Products .45 ACP FM-45 lower receiver, and the other is a "standard" AR-15 lower receiver I picked up from Palmetto State Armory.

Here’s what happened...

I'm an idiot; so, here's a quick video on how to replace the magazine catch on a Foxtrot Mike Products .45 ACP lower. FYI, Foxtrot Mike has awesome customer service!

I tested the 10mm 180 grain Hornady XTP shot from a Glock 20 into ballistics gel. These were loaded with 9.5 grains of Hodgdon Longshot powder.

Day one of our Georgia Shooting Connection / TheReloadersNetwork meet up at Dead Zero Shooting Park in Spencer, TN. This was the first time many of us meet face to face. The range treated us like royalty. Top notch facility that will keep getting better over time. Many, many rounds were sent down range that day.

A quick look at the Foxtrot Mike Products .45 ACP stripped lower receiver. I do a quick comparison to a "standard" AR-15 lower receiver and cover a few of the similarities and a few of the key differences.

I pick up a lot of range brass, hence the Range Squirrel moniker. On my last big foraging expedition I picked up a bunch of brass along with aluminum cases, which as I noted in a previous video is not deemed reloadable by the industry. At my own risk I do reload them once, mark and discard after firing.

The Super Hi-Point Suppressed/Silenced C9 Modded-Out FLT Style!

Secret Squirrel Kydex sent me out this holster and I was pleasantly surprised.

Testing out Accura 124gr 9mm bullets with Hodgdon HP38 and Starline Brass in my Glock 17 with a Bear Creek Arsenal Barrel.

Today, we talk about what we did with guns this week, a few cool new molds, and talk about what's going on in Connecticut.

This is a Video Response to Full.Lead.Taco's Tacopocalypse Video.

Is Paul Harrell Right? Is "hyper" ammo bad? Are Cheap Hollowpoints Okay? You be the Judge!

Well, I'm back at least for now and hope the crazy fire season is over for the year. Here's a quick update on what's been going on, and what you can expect in the near future with our channel..!!

Just a short video about winter carry edc.

I give you my shooting impressions of the OverWatch Precision Poly-Dat Glock trigger. This is for the budget minded shooter who wants to upgrade their trigger.

Kourtney Decides which gun she likes better for EDC, the Glock 43 or The Glock 43X

In this episode, Carl and Mike talk about some glocks, some optics, and give some advice to keep an eye out for deals this next week or two... And go ahead, treat yourself!

I’m pretty bad and only shoot and clean my carry gun once a year. How often do you shoot and carry yours?

Out shooting some of the TL356-124-2R bullets from a Lee mold that MCK sent out. Thanks for letting me try these MCK!

I’ve seen a lot of videos the last couple years, so I thought I would see what they are about. Thanks for watching T.A.B.VideosLove of God, Family, Country and 2A Supporter.

While loading up some 10mm recently I ran into the infamous Glock bulge. Here is a video on the setup and benefits of the Redding G-rx Die with the optional bottle adaptor. Squatch ReloadingThis channel focuses on the guy or gal who is thinking about getting into reloading.  There is a lot of information out […]

In this videos series we have covered basic press setup, dies, powder measures, safety items, and now we are ready to do some quick confirmations and run the press. This is the final load video in this series. Squatch ReloadingThis channel focuses on the guy or gal who is thinking about getting into reloading.  There […]