In today's video, I am powder coating my recent cast 9mm rounds. I am using Harbor Freight Red powder. I am having trouble with the powder sticking to the bullets. After watching several videos from authors of The Reloaders Network, I'm still not getting the results I want. All the rounds are usable, but they just don't look the best. Some have thin and thick spots, and some have bare spots. Factors such as weather, humidity, and types of plastic containers could be affecting my results. All the rounds were sized to .356 using a NOE Sizing Die.

Trying out the Eastwood Full Gloss Clear, Mirror Black, Orange, Bright Yellow, and Single Stage Reflective Chrome powder coat on my cast bullets.

Trying out the Eastwood Ford Dark Blue, Gloss White, Rally Wheel Silver, Atomic Pink, and Copper Penny powder coat on my cast bullets.

The reason I am using the spray on the bullets is because I smoke the mold and I like to remove the wax off the bullets I like the spray because it’s easy you can also use acetone in a glass jar let it dry. ocean374I have enjoyed the outdoors for many years. I am […]

I recently cast bullets for 9mm with the NOE HTC358-133-RN mold, powder coated them with Eastwood Lime Green, and sized them to .358". I am now working up a load with Alliant e3 powder, which is a challenge since there is no published load data for this or a similar bullet. I am shooting these from my Beretta 92S.

I recently cast bullets for 9mm with the NOE HTC358-133-RN mold, powder coated them with Eastwood Lime Green, and sized them to .358". I am now working up a load with Unique powder, which is a challenge since there is no published load data for this or a similar bullet. I am shooting these from my Beretta 92S.

Powder coating session for my recently cast 9mm bullets. I cast these bullets from the NOE HTC358-133-RN mold.

This one's for Willie!

I'm reloading the first .44 Magnum hollow point for the Powder Coated Cast Lead Hollow Point Bullet Testing series. In this video I go through the process of figuring out the H110 powder charge for the Keith SWC .44 Magnum, and then I load the bullets.

Hey guys! Been a little since I made a “start to finish” video–and finally caught my breath a little from the busyness of summer, enough to throw together a video.  I was actually searching my channel for my 9mm plinking ammo video a week or two ago, when I realized I never ended up editing […]

Today we unbox a surprise package from our friend Tim over at the PC Bullet Empire. Thank you very much Emperor.

(The video was originally posted to YouTube on April 26, 2017.) I'm reloading the first .44 Special hollow point for the Powder Coated Cast Lead Hollow Point Bullet Testing series. This series is a long experiment testing powder coated cast lead hollow point bullets made from various alloys and fired at various velocities. In this video I go through the process of figuring out the Unique powder charge for the Keith SWC .44 Special, and then I load the bullets.

Casting & Loading 357 SIG

In Congress, July 4, 1776. The unanimous Declaration of the thirteen united States of America, When in the Course of human events, it becomes necessary for one people to dissolve the political bands which have connected them with another, and to assume among the powers of the earth, the separate and equal station to which […]

In this video we cover the third load in our 35 Remington Load Series. This covers the loading, shooting, and the results.

I recently purchased two molds from Arsenal Molds.

Powder coating is a well accepted process today for putting a jacketed lube coating on your casts…it’s been demonstrated over and over again, especially the methods for batch baking that makes this job of work fast and easy. There’s one way, one of the original techniques that is pretty much frowned on these days because […]

I recently purchased a mold to cast .45 caliber bullets for my 1911.  In this video, I use the mold to cast three different style bullets, and then powder coat and size them.  This mold has no lube groove, and the bullets must be coated with Hi-Tek or powder coat.

This is the seventh video in the Powder Coated Cast Lead Hollow Point Bullet Testing series, which is a long experiment testing powder coated cast lead hollow point bullets made from various alloys and fired at various velocities. In this video I have a little fun using various methods to measure the hardness of the lead alloys used to cast the bullets that will be used for this test.

This is the sixth video in the Powder Coated Cast Lead Hollow Point Bullet Testing series, which is a long experiment testing powder coated cast lead hollow point bullets made from various alloys and fired at various velocities. In this video I measure, size, and weigh each of the bullets that will be used for this test.

This is the fifth video in the Powder Coated Cast Lead Hollow Point Bullet Testing series, which is a long experiment testing powder coated cast lead hollow point bullets made from various alloys and fired at various velocities. In this video I powder coat all of the bullets that will be used for this test.

Having fun lobbing lead! Bullets made with NOE311-175-FN (Saeco315 clone) mold.

Powder Coating. How much is too much at one time? If you can lift them and it don't crush your powder coating oven, will this work??Baking Temperature Is Important for Perfect Bullets!

This is a video response to the "Powder Coating Bullets On "Silicone" VS "Wire Mesh" ?" video posted by Elvis Ammo. I was surprised by the horrible results he experienced using a silicone mat and decided to do my own mini-experiment to see if I could get similar or better results.