I was finally able to get to the range and gather some velocity data using Ramshot True Blue by Western Powders. The two bullets used were the Lee 356-124-2R and the NOE HTC-358-133-RN. The lighter Lee bullets seemed to prefer a lighter charge while the heavier bullet from NOE preferred a higher charge. This goes […]

In this video we test for bullet expansion with our NOE hollow point bullets cast from Clip on Wheel Weight alloy. The test doesn't go as planned.

Preparation is the key to success in any endeavor; load development is no different. There are many steps that go into the preparation for load development. This post will discuss the steps in detail in relation to my Henry 45LC 50 Yard Hunting Load Development Series.

Tried the New NOE HOLLOW POINT MOULD. Put in long pins for deeper point, changed to a shorter pin as wasn't coming out as I intended. Mould had been cleaned and smoked, went up and down with temp, no avail. Finally added a softer alloy which did the trick.

I've been busy shopping and it's time to open some packages and show what is upcoming in some future videos.

Mail call from Georgiaboy44

Pleasant surprise in the ‘ol mailbox! Kyle LuskJust an ordinary average guy!

I want to thank AL NELSON, Full lead Taco, Loads of Bacon, and all of my buddies who reload. I am almost positive they let me win to shut me up!! Shipping was quick, the chat was on 3/20, Taco contacted me on 3/21 to pick a mould, and it arrived on 3 /23. Again, […]

Several years ago, I purchased a lightly used brushed-chrome model of the Desert Eagle handgun chambered in 50 Action Express.  Finding the .50 cal bullets for it has been tricky at times–other times it has been quite expensive.  To save money and to not be reliant on bullet availability at the local or online shops, […]

Hey guys! Been a little since I made a “start to finish” video–and finally caught my breath a little from the busyness of summer, enough to throw together a video.  I was actually searching my channel for my 9mm plinking ammo video a week or two ago, when I realized I never ended up editing […]

Today is the day. First time casting bullets. I am using a Lee 4 20lb pot. A NOE HTC358-133-RN-BO5 2 cavity mould. I have several pounds of processed wheel weights that I will be using. My first session this morning, about 50% were acceptable, and the second session after lunch about 85-90% were looking good.

In this video I show most of the steps from start to finish on how I make one of my favorite milk jug exploding 45-70 loads. All the details should be in the video, but if you have any questions, feel free to leave a comment here and I will respond as quickly as I […]

Al Nelson from NOE Bullet Moulds joined us for a live question answer session and casual chat. Thank you to everyone that joined us for this great conversation!

In this video I show the bullet lubing and sizing methods I used for my first batch of cast bullets.

Part four of my first bullet casting experience. In this episode, I document the reloading of my .358 – 158 grain bullets, cast from an NOE mold. JCM45

My First Bullet Casting Session - Part One

My First Bullet Casting Session - Part Two. You experienced bullet casters out there, please offer as much advice as you want to. I value your opinions!

3 months ago I posted a video about "My New Mobile Bullet Casting Bench". Today I finish the upgrades. I added the NOE Lead Pot Mould Guide. I also added ventilation for my casting pot.

http://noebulletmolds.com/smf/index.php/topic,2198.0.html Above is a link for an active group buy on the NOE forum. As many of you know, NOE is one of our Reloader’s Network sponsors. NOE molds are incredibly nice molds and are quite easy to use. Their service is great, and they are quick to ship. How their forum works: members are […]

"Thank you for helping us make it 10 years! In appreciation we are offering 25% off all our stock inventory. 7 Days only, March 16th thru the 22nd."

Hey guys! I got this coupon code from Al at NOE to share with you all!

Info on that sheet should be more clear to old folks and old men.

HTC310-177-SP

One of my reasons for getting into reloading and casting.. Hope it helps you as well..