I recently purchased a mold to cast .45 caliber bullets for my 1911.  In this video, I use the mold to cast three different style bullets, and then powder coat and size them.  This mold has no lube groove, and the bullets must be coated with Hi-Tek or powder coat.

‘In the beginning…’ I started casting and ‘Lube-Sized’ my rifle/pistol projectiles…back then, the choice of lube was a hot topic and there were many heated exchanges about which lube would allow particular advantages. Some lubes required a ‘heater’ to be installed under the Sizer, some not. ‘Leading’ of the barrel was a problem when the […]

A reminder to use your 25% off discount code before it expires tonight.

I want to thank each and every one of my awesome subscribers by doing a 100 subscriber give-away!

I go through the entire process of casting, powdercoating, loading, and shooting some hard cast round nose bullets using the high quality NOE bullet mold for my 10mm handguns.  I had wanted a round nose bullet for 10mm plinking loads.  Something that would feed simply and flawlessly in each of my 10mm handguns and carbines.  This bullet mold seems to do the trick.

Looks like I squeaked this video upload just in time before getting my 17th video deleted and a YouTube Channel strike. I can’t upload to YT for the next little while, but I will still try to upload to TRN. Here you go, Enjoy! Full.Lead.TacoI love guns, tacos, and lead. I use the guns. The […]

Having fun lobbing lead! Bullets made with NOE311-175-FN (Saeco315 clone) mold.

Years ago (after much frustration with my Marlington/Remlin 30-30), I gave up on the 30-30 cartridge.  I just could never get my Marlin 336 to shoot well.  I tried factory ammo, reloaded ammo with jacketed bullets, pointy hornady (flex tip) bullets, cast bullets, etc… as well as several different powders.  My levergun just shot horribly.  […]

This video will hopefully get some guys working on some 30-30 Winchester rounds. I'll be developing some, and hope you all will join in. The main objective is to get those old rifles out, dust them off, and start loading for and shooting them. So, I hope to be seeing lots of 30-30 videos. Join in when you can, and let's have some fun!

300 BLK Cast Bullet For Dummies (NOE 310-225-RN) Start to Finish!

315 Gr 338 Spectre Subs -- Now I have ammo!

338 Spectre Cast 250gr Subsonic Bolt Gun Loads (NOE341-245-SP)

44 mag gas checks

44 magnum project

This version is with-out music over dialog

I wanted to see how much penetration these subsonic 600 gr 458 socom bullets would have through water (milk jugs). We saved up a bunch of jugs and went out to test. Watch the video for the results. Test Firearm: 10.5″ 458 Socom Upper by Radical Firearms Registered SBR lower Silencerco Hybrid Suppressor Ammo Details: […]

I recently cast bullets for 9mm with the NOE HTC358-133-RN mold, powder coated them with Eastwood Lime Green, and sized them to .358". I am now working up a load with Unique powder, which is a challenge since there is no published load data for this or a similar bullet. I am shooting these from my Beretta 92S.

I recently cast bullets for 9mm with the NOE HTC358-133-RN mold, powder coated them with Eastwood Lime Green, and sized them to .358". I am now working up a load with Alliant e3 powder, which is a challenge since there is no published load data for this or a similar bullet. I am shooting these from my Beretta 92S.

It's cold outside.  YouTube has given my channel its second strike and I'm not allowed to upload anything to their servers for a couple of weeks.  Should I curl up in front of the fireplace and wish for warmer days?  Not hardly! There's hog hunting, new firearms, and plenty more going on...

My first casting session with the NOE HTC358-133-RN two cavity mold for 9mm. This is also my first casting session with the PID I recently assembled.

Hello, This is a video I posted on YouTube on April 26, 2018. It shows a casting session with 3 molds, one of which was given to me as a give-a-way on a Full.Lead.Taco/Loads of Bacon live stream, thus the title. This is the first attempt at casting with the Taco Mold (358477) 150 grain semi […]

Today, I show in this video the entire process from start to finish how I cast, powder coat, load, and shoot some 250gr coated cast lead hollow points in the 44 magnum. This is one of my "go to" loads for blasting milk jugs without much recoil.  These loads are perfect for maximum explosion with minimal recoil--great for those milk jug duels with the buddies.  Got questions?  Feel free to leave me a comment below, and I will do my best to answer it!

F.L.T. Bday Party Casual Shoot 2019

Sit back, relax, and breath calmly… Time for another FLT Haiku. A Haiku is a Japanese form of poetry consisting of 3 lines with a pattern of 5, 7, 5 syllables. Culture day for all you guys!  (As a side note, thanks to my patreon supporters for providing enough peanut butter to do this video, […]